Manual Groasis Growsafe Telescoprotexx

Keeping a sapling alive requires a lot of work. There are several circumstances in which the Growsafe Telescoprotexx plant protector can help the sapling survive during the first critical years and help the tree to grow faster than other trees who grow without the Growsafe Telescoprotexx plant protector. In the following situations, the Growsafe Telescoprotexx plant protector provides the solution to protect your trees:

  • When you plant trees in the same area as grazing animals like sheep or goats;
  • When the tree has to endure strong winds;
  • In warm climates;
  • In cold climates;
  • Against the sun.

If you have bought the Growsafe Telescoprotexx plant protector, you will see the 6 steps below on how to assemble the Growsafe for optimal use. For more information about the Growsafe Telescoprotexx plant protector, please click here. 

How to assemble the plant protector of Groasis 

With this help device you can easily assemble the Growsafe Telescoprotexx

Step 1: Use the adhesive to make the help device 

Put the tabs in the notches and use the hulp device if necessary to assamble the Growsafe Telescoprotexx

Step 2: At first, put the two lips in the notches (from the outside to the inside). Place the help device around the Telescoprotexx and continue making the tube by sliding it inside the help device. 

The Groasis Growsafe Telescoprotexx is 50 centimeters high and can grow with the tree or plant

Step 3: Put the tube vertical with the name upwards. The height of the tube is 50 cm.

You can make the Growsafe Telescoprotexx as high and wide as you want

Step 4: Make the second tube with the help device and put the second tube INSIDE the first tube. Put the name always upwards. 

Push the locks exactly above the other. Then push the locks inwards and fold them aside

Step 5: Push the locks exactly above the other. Then push the locks inwards and fold them aside. 

Lock the Growsafe Telescoprotexxen by turning them in the opposite direction

Step 6: Turn the tubes in each other in the opposite direction to lock. 

The Growsafe can go up to 2.10 meters high to protect your plants and trees against animals and the sun

The Telescoprotexx can go up to 210 cm! For more information, scan the QR-code or the barcode or mail to This email address is being protected from spambots. You need JavaScript enabled to view it.. 

For more information about the Groasis Growsafe, please scan the QR code For more information about the Groasis Growsafe, please scan the code